Function reference • DLMtool Documentation

Output Controls Management Procedures that return a total allowable catch (TAC)
`AvC()`	Average Catch
`BK()` `BK_CC()` `BK_ML()`	Beddington and Kirkwood life-history MP
`CC1()` `CC2()` `CC3()` `CC4()` `CC5()` `CurC()`	Geromont and Butterworth (2015) Constant Catch
`CompSRA()` `CompSRA4010()`	Age-Composition Stock-Reduction Analysis
`DCACs()` `DCAC()` `DCAC_40()` `DCAC4010()` `DCAC_ML()` `DAAC()` `HDAAC()`	Depletion Corrected Average Catch
`DBSRA()` `DBSRA_40()` `DBSRA4010()`	Depletion-Based Stock Reduction Analysis
`DD()` `DD4010()`	Delay - Difference Stock Assessment
`Fratio()` `Fratio4010()` `DepF()` `Fratio_CC()` `Fratio_ML()`	FMSY/M ratio methods
`DynF()`	Dynamic Fratio MP
`Fadapt()`	Adaptive Fratio
`Fdem()` `Fdem_CC()` `Fdem_ML()`	Demographic FMSY method
`GB_CC()`	Geromont and Butterworth Constant Catch Harvest Control Rule
`GB_slope()`	Geromont and Butterworth index slope Harvest Control Rule
`GB_target()`	Geromont and Butterworth target CPUE and catch MP
`Gcontrol()`	G-control MP
`ICI()` `ICI2()`	Index Confidence Interval
`Iratio()`	Mean Index Ratio
`Islope1()` `Islope2()` `Islope3()` `Islope4()`	Index Slope Tracking MP
`IT5()` `IT10()`	Iterative Index Target MP
`Itarget1()` `Itarget2()` `Itarget3()` `Itarget4()`	Incremental Index Target MP
`ITM()`	Index Target based on natural mortality rate
`Ltarget1()` `Ltarget2()` `Ltarget3()` `Ltarget4()` `L95target()`	Length Target TAC MP
`Lratio_BHI()` `Lratio_BHI2()` `Lratio_BHI3()`	Mean length-based indicator MP of Jardim et al. 2015
`LstepCC1()` `LstepCC2()` `LstepCC3()` `LstepCC4()`	Step-wise Constant Catch
`MCD()` `MCD4010()`	Mean Catch Depletion
`Rcontrol()` `Rcontrol2()`	Intrinsic rate of Increase MP
`SBT1()` `SBT2()`	SBT simple MP
`SPmod()`	Surplus production based catch-limit modifier
`SPMSY()`	Catch trend Surplus Production MSY MP
`SPslope()`	Slope in surplus production MP
`SPSRA()` `SPSRA_ML()`	Surplus Production Stock Reduction Analysis
`YPR()` `YPR_CC()` `YPR_ML()`	Yield Per Recruit analysis to get FMSY proxy F01
Input Controls Management Procedures that return a total allowable effort (TAE), spatial closure, or size regulation
`curE()` `curE75()`	Fishing at current effort levels
`DDe()` `DDes()` `DDe75()`	Effort-based Delay - Difference Stock Assessment
`DTe40()` `DTe50()`	Effort searching MP aiming for a fixed stock depletion
`EtargetLopt()`	Effort Target Optimum Length
`ItargetE1()` `ItargetE2()` `ItargetE3()` `ItargetE4()`	Incremental Index Target MP - Effort-Based
`ITe5()` `ITe10()`	Index Target Effort-Based
`LBSPR()` `LBSPR_MLL()`	Length-Based SPR MPs
`LstepCE1()` `LstepCE2()`	Step-wise Constant Effort
`LtargetE1()` `LtargetE4()`	Length Target TAE MP
`matlenlim()` `matlenlim2()` `minlenLopt1()` `slotlim()`	Size limit management procedures
`MRreal()` `MRnoreal()`	Spatial closure and allocation management procedures
Mixed Controls Management Procedures that return a combination of Output and Input controls
`AvC_MLL()`	Average Catch with a size limit
`Itarget1_MPA()`	Itarget1 with an MPA
Reference Management Procedures used as Performance References
`FMSYref()` `FMSYref50()` `FMSYref75()` `NFref()`	Reference management procedures

Reference

Output Controls

Input Controls

Mixed Controls

Reference

Contents